•You adjust electronically the level of the water softener.
•The appliance has a malfunction.
Factory setting: acoustic signals active.
Deactivating the acoustic signals
1.Switch on the appliance. Make sure that the appliance is in setting mode.
2.Press and hold button (4) and button (5) at the same time until the indicators of buttons (3), (4) and (5) flash.
3.Release button (4) and button (5).
4.Press button (5),
•The indicators of button (3) and but- ton (4) go off.
electrolux 7
•The indicator of button (5) continues to flash.
•The display shows the setting of the acoustic signals.
Acoustic signals activated.
Acoustic signals deactivated.
5.Press button (5) to change the setting. The display shows the new adjustment.
6.Switch off the appliance to confirm.
To activate the acoustic signals again, do steps (1) through (6).
USE OF THE APPLIANCE
Refer to the specific instructions for each step of the procedure.
1.Check if the water softener level is cor- rect for the water hardness in your area. If necessary set the water softener.
2.Fill the salt container with dishwasher salt.
3.Fill the rinse aid dispenser with rinse aid.
4.Load cutlery and dishes into the appli- ance.
5.Set the correct washing program for the type of load and soil.
6.Fill the detergent dispenser with the cor- rect quantity of detergent.
7.Start the washing program.
If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), set the multi- tab function. Refer to 'Multitab func- tion'.
SETTING THE WATER SOFTENER
The water softener removes minerals and salts from the water supply. Minerals and salts can have bad effect on the operation of the appliance.
Water hardness is measured in equivalent scales:
• mg/I (millimol per litre)
•ppm (parts per million),
•mmol/l (millimol per litre - international unit for the hardness of water).
Adjust the water softener in to the water hardness in your area. If necessary, contact your local water authority.
mg/l
910 - 1250
760 - 909
650 - 759
510 - 649
400 - 509
330 - 399
260 - 329
190 - 259
70 - 189
Water hardness
ppm | mmol/l |
910 - 1250 | 9.1 - 12.5 |
760 - 909 | 7.6 - 9.0 |
650 - 759 | 6.5 - 7.5 |
510 - 649 | 5.1 - 6.4 |
400 - 509 | 4.0 - 5.0 |
330 - 399 | 3.3 - 3.9 |
260 - 329 | 2.6 - 3.2 |
190 - 259 | 1.9 - 2.5 |
70 - 189 | 0.7 - 1.8 |
|
|
Water hardness setting
manually | electronically |
2 | 10 |
2 | 9 |
2 | 8 |
2 | 7 |
2 | 6 |
2 | 5 |
1 | 4 |
1 | 3 |
1 | 2 |
|
|
