The upper basket
The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses; Glasses with long stems can be placed upside down in the raised cup racks.
Larger plates (dinner plates up to 24 cm in diameter) must be loaded in the front part of the upper basket.
Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move.
When loading the dishes, ensure that you do not cover the water inlet funnel in the middle of the upper basket.
Before closing the door, ensure that the spray arms can rotate freely.
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 31 cm in diameter) you can load them in the lower basket after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1.Move the front runner stops (A) of the upper basket outward and slide the basket out.
2.Refit the basket in the higher position and replace the stops (A) in their original position.
When the top basket is in the higher position it will only take plates up to 20 cm in diameter and you will not be able to use the raised cup racks.
After loading your machine always close the door, as an open door can be a hazard.
US30 | IEC 436 / DIN 44990 |
US02 |
US16 |
US16 |
A |
RC01 |
11 | PBA04UK |
