Building-in
This dishwasher is designed to be fitted under a kitchen counter or worksurface.
It is essential that the recess dimensions indicated in the diagram are followed.
No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.
It is absolutely essential that the dishwasher is disconnected from the electricity supply before gaining access to any internal component.
Fit the dishwasher into an appropriate housing space and connect it.
When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.
The recess height may be anywhere between 820 and 880 mm from the floor since the dishwasher incorporates adjustable feet (max 60 mm).
A distance of 2 mm should be allowed between the top of the dishwasher and the counter top.
Levelling
Good levelling is essential for correct closure and sealing of the door.
When the appliance is correctly levelled, the door will not catch on the levelling spacers, either side of the cabinet.
If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.
| 596 |
| 600 |
|
| ⎟ 880 | |
| 575. | ||
| 820 | ||
878 | max | ||
|
| ||
⎟ | 555 |
|
|
818 | . |
| |
max |
| ||
II62 |
|
|
|
27 | PFI04UK |
