Electrolux ESI 66010 First use, If you want to use combi detergent, Set the water softener

first use electrolux 11

First use

Before using your dishwasher for the first time:

●Ensure that the electrical and water connections comply with the installation instructions

●Remove all packaging from inside the appliance

●Set the water softener

●Pour 1 litre of water inside the salt container and then fill with dishwasher salt

●Fill the rinse aid dispenser

If you want to use combi detergent

tablets such as: ‘3 in 1’, ‘4 in 1’, ‘5 in 1’ etc... set the Multi-tab function (see Multi-tab function).

Set the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these minerals and salts, the harder your water is.

Water hardness is measured in equivalent scales, Clarke degrees, French degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness of water).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

Water hardness				Adjusting the water
				hardness setting
Clarke	°TH	mmol/l	manually	electronically
64 - 88 91 - 125		9.0 - 12.5		2	level 10
53 - 63	76 - 90	7.6 - 8.9		2	level 9
46 - 52	65 - 75	6.5 - 7.5		2	level 8
36 - 45	51 - 64	5.1 - 6.4		2	level 7
28 - 35	40 - 50	4.0 - 5.0		2	level 6
23 - 27	33 - 39	3.3 - 3.9		2	level 5
18 - 22	26 - 32	2.6 - 3.2		1	level 4
13 - 17	19 - 25	1.9 - 2.5		1	level 3
5 - 12	7 - 18	0.7 - 1.8		1	level 2
< 5	< 7		< 0.7	1	level 1

*no salt is necessary

Use of salt

yes

yes

yes

yes

yes

yes

yes

yes

yes

no *