The control panel
On/Off button | Washing programmes | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Programme selection/cancel button | Indicator lights |
Programme indicator lights
Programme selection/cancel button (CANCEL):
the selection of a washing programme occurs by the means of this button, press it until the indicator light corresponding to the desired washing programme illuminates (see "Washing programmes" chart). The end of cycle indicator light flashes. Once the washing programme has been set, close the dishwasher’s door, the programme will start automatically.
With this button it is also possible to:
Audible signals
Audible signals have been introduced to help indicate which operations the dishwasher is performing.
-end of washing programme,
-the setting of the water softener,
-malfunction of the machine.
-cancel a washing programme in progress,
-set the level of the water softener (see specific paragraph),
-deactivate/activate the audible signals.
Indicator lights: have the following meanings:
End of cycle: illuminates when the washing programme has ended.
It also has added functions of visual signalling as:
-the setting of the water softener,
-deactivation/activation of the audible signals,
-intervention of an alarm due to the malfunction of the machine.
Salt: refilling indicator light: illuminates when the salt has run out.
Deactivation/activation of the audible signals
Factory setting: audible signals activated.
1.With the dishwasher switched off, press the On/Off button. The end of cycle indicator light flashes (setting mode).
In case salt and/or rinse aid refilling is necessary the corresponding indicator lights illuminate.
If one of the washing programme indicator lights is on, this means that a washing programme has been set.
The setting must be cancelled: press for about 3 seconds the programme selection/cancel button; the indicator light of the set programme turns off and the end of cycle indicator light flashes, indicating that the set programme has been cancelled and that the machine is now in setting mode.
2.Press and keep pressed the programme selection/cancel button until the programme indicator light 1 illuminates and programme indicator light 2 flashes.
Press the programme selection/cancel button again, the programme indicator light 1 starts flashing and the programme indicator light 2 turns on with a fixed light to indicate that you have activated the function for the deactivation/activation of the audible signals.
The constant illumination of the end of cycle indicator light means that the audible signals are activated.
3.To deactivate the audible signals, press the programme selection/cancel button again, the end of cycle indicator light turns off indicating that the audible signals are deactivated.
5.To memorise the operation, switch off the machine by pressing the On/Off button or wait for about 60 seconds, after which the machine will automatically return to setting mode.
To activate again the audible signals simply follow the above operations until the end of cycle indicator light illuminates.
5
