The control panel
Digital display
Function buttons
Indicator lights
On/Off button | Programme selection buttons |
| |
| Delay start button |
Function buttons: in addition to the selection of the washing programme and the delay start option, the following functions can also be set with the help of these buttons:
-the setting of the water softener,
-the cancelling of a washing programme in progress,
-deactivation/activation of the audible signals.
Programme selection buttons: allows the selection of the desired washing programme (see "Washing programmes" chart).
«Delay start» button: this option allows the start of the programme to be delayed from 1 to 19 hours.
The digital display indicates:
-the level of hardness to which the water softener is set,
-if the audible signals are activated/deactivated,
-the number corresponding to the selected washing programme,
-the approximate remaining time of the running programme,
-the end of the programme (a zero 0 will appear in the digital display),
-the countdown of the delay start,
-fault codes concerning malfunction of the dishwasher.
Indicator lights: have the following meanings:
Salt refilling indicator light, illuminates when the salt has run out.
Rinse aid refilling indicator light, illuminates when rinse aid has run out.
Audible signals
Audible signals have been introduced to help indicate which operations the dishwasher is performing:
-setting of the water softener
-end of programme
-intervention of an alarm due to malfunction
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1.Press the On/Off button. The indicator lights of all the programme selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is illuminated this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3 for about 2 seconds, the indicator light of the set programme button starts flashing. After about 2 seconds the indicator lights of all the programme selection buttons will illuminate, this means that the set washing programme has been cancelled and the machine is now in setting mode.
2.Press simultaneously function buttons 2 and 3, the indicator lights of function buttons 1, 2 and 3 start flashing.
3.Press function button 3, the indicator lights of function buttons 1 and 2 turn off while the indicator light of function button 3 goes on flashing, the digital display indicates the current setting.
Audible signals deactivated
Audible signals activated (factory set)
4.To change the current setting, press again function button 3, the digital display will indicate the new setting.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.
5
