Installation

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Levelling

Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on the levelling spacers on either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply. The water pressure must be within the limits given in the "Technical specifications" (Instruction Book - Part 2). Your local Water Authority will advise you on the average mains pressure in your area.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation.

Do not use, for connection, old hoses which have been used in another appliance.

The locknut must be correctly fitted to avoid water leaks.

Avoid bends or kinks in the hose which could prevent or slow down the water supply.

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. This will prevent deposits of sand or rust clogging the inlet hose.

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it if necessary with a clip.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow

-Earth

Blue

-Neutral

Brown

-Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

E

13 A

L

N

CE04

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

The appliance should not be connected to the electrical supply by means of an extension cable.

7

Page 14 Page 16
Page 15
Image 15
Electrolux ESL 6114 manual Installation, Water supply connections, Water outlet hose connection, Electrical connection
Page 14 Page 16

ESL 6114 specifications

The Electrolux ESL 6114 is a highly efficient and stylish built-in dishwasher, designed to meet the needs of modern households. This model is known for its sleek design and exceptional performance, making it a popular choice among consumers looking for reliability and functionality.

One of the standout features of the Electrolux ESL 6114 is its impressive energy efficiency. With an A++ energy rating, this dishwasher not only minimizes energy consumption but also reduces water usage, making it an environmentally friendly option. It is capable of cleaning up to 13 place settings, which is ideal for families or individuals who frequently entertain guests.

The ESL 6114 incorporates advanced technologies that enhance its cleaning capabilities. The MultiZone feature allows users to customize the load settings, enabling them to wash half-loads in either the upper or lower racks, which saves both water and energy. Additionally, the AutoFlex program automatically adjusts the wash cycle based on the dirtiness of the dishes, ensuring optimal cleaning results every time.

Another key characteristic of the Electrolux ESL 6114 is its ultra-quiet operation. With a noise level of just 47 dB, it runs quietly in the background, making it suitable for open-plan living spaces where noise can be a concern. This is complemented by its delay start option, which allows users to schedule wash cycles during off-peak times to take advantage of lower energy rates.

The dishwasher features a user-friendly interface with intuitive controls, making it easy to select the desired wash cycle. Among the various programs available, the Quick Wash function stands out, delivering satisfactory cleaning results in just 30 minutes, ideal for when time is of the essence.

In terms of interior design, the ESL 6114 is spacious and well-organized. It features adjustable top and bottom racks, providing flexibility for larger pots and pans. The Cutlery Basket ensures proper hygiene and cleanliness for utensils, while the dedicated glass holder protects delicate glassware during washing.

Overall, the Electrolux ESL 6114 excels in a range of features, from energy efficiency to advanced washing technologies. Its blend of functionality, design, and performance makes it a great addition to any modern kitchen, catering to the diverse needs of households. With its competitive pricing and robust capabilities, it stands out in the crowded dishwasher market.
Top Page Image Contents