Electrolux ESL 67030 user manual Malfunction, Mod PNC

34 electrolux something not working

The flashing of the point-shaped optical signal on the floor beneath the dishwasher’s door will not be visible if the appliance has been installed higher up with a furniture door mounted flush.

Malfunction

The programme does not start

Once these checks have been carried out; switch on the appliance, press the button of the programme that was running before the intervention of the alarm and close the dishwasher’s door.

The programme will continue from the point at which it was interrupted.

If the malfunction or fault code reappears contact the Service Force Centre.

For other fault codes not described in the above chart, please contact your Service Force Centre.

Possible cause and solution

●The dishwasher’s door has not been

properly closed.	Open door	control light
illuminated.
Close the door.

●The main plug is not plugged in. Insert the main plug.

●The fuse has blown out in the household fuse box.

Replace the fuse.

●Delay start has been set.

If dishes are to be washed immediately, cancel the delay start.

Contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.).

This information can be found on the rating plate located on the side of the dishwasher door.

So that you always have these numbers at hand, we recommend you to make a note of them here:

Mod. : . . . . . . . . . . . . . . . . . . . . . . .

PNC :. . . . . . . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . . . . . . . .