Installation
Leveling the Compactor
Your compactor has four adjustable levelers; (2) rollers in the rear and (2) legs in the front. They allow you to adjust for uneven floors and also trim the unit up to fit an under- counter installation.
back of
compactor 
slots
adjusting
screws
wood 
block
rollers
To level the back of the compactor:
Tip the back of compactor up and onto a wood block. Loosen the adjusting screws only far enough to move the rollers to a higher or lower slot. Retighten the adjusting screws and remove the wood block.
front of
compactor
wood block
leveling
legs
To level the front of the compactor:
Tip the front of compactor up and onto a wood block. Turn the leveling legs in or out to the desired position. Remove the wood block.
