Electrolux EUCAIWL and safety, Perfect rinsing performance, Water inlet , water enters, at 84C

6electrolux green&clean dw

... and safety!

WASH•SAFE CONTROL: the rinse quality is guaranteed thanks to the constant rinsing temperature of 84°C and the water pressure which is independent from the mains.

Perfect rinsing performance

Sanitized plates are the best guarantee for hygiene and Electrolux Professional knows the importance of providing a total detergent removal in the rinsing phase to fulfi l best-in-class safety requirements.

The most dangerous groups of bacteria fi nd their ideal conditions for growth in an environment with a temperature between 20° and 60° (max 75°). Therefore, the constant rinsing temperature of 84°C (see below) assures perfect hygienic conditions.

1. Water inlet, water enters				The air-breakprevents water
at a pressure from 0,5 to 7 bar				from fl owing back into the mains
(depending on water supply)				in case of machine failure
2. Air gap exit, water pressure				The atmospheric boiler
reaches 0,9-1 bar (depending				provides a large quantity of
on the installation location) while				hot water at a constant high
temperature remains constant at				temperature
inlet conditions		2		The boiler waiting device
3. Boiler exit, water reaches			5	ensures that rinsing starts only
84°C while pressure remains	4			when the water reaches the right
constant at 0,9-1 bar				temperature
4. Rinse booster pump exit,	1			The rinse booster pump pushes
water pressure reaches 6 bar while				water at constant high pressure.
	3
temperature remains at 84°C				Detergent removal is granted
5. Rinse nozzle exit, at each				even with low water inlet pressure
nozzle the pressure drops to 0,4-				The solenoid valve allows water
0,5 bar while temperature remains				from the mains to enter the
at 84°C				machine to fi ll the boiler

The WASH•SAFE CONTROL light turns green to guarantee rinsing has been performed perfectly with a constant temperature over 84°C.

Spot-free glasses and cutlery

•Models equipped with Continuous Water Softener (CWS) guarantee non-stop dishwashing because workfl ow is not interrupted for resin regeneration thanks to two resin containers installed in the back: the electronic control uses one of the containers to soften the water and at the same time regenerates the resins in the other one

•100% of the water entering the dishwasher is softened providing spot-free results and reducing scale build-up

•The water softener is integrated with the atmospheric rinse system, maintaining high rinse water pressure and a constant high temperature during the rinse phase

•All models are equipped with external salt filling cap, so the operator can easily load the container without having to access the internal chamber

•A sensor advises the operator when the salt container needs to be refi lled