Electrolux EUF29260W Location, Removing the transport support, Levelling, Electrical connection

10electrolux

Climate	Ambient temperature
class
SN	+10°C to + 32°C
N	+16°C to + 32°C
ST	+16°C to + 38°C
T	+16°C to + 43°C

Location

To ensure best performance, if the appli- ance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 40 mm . Ideally, however, the appliance should not be positioned be- low overhanging wall units.

The ventilation space can be:

•directly above the appliance

•behind and above the top cupboard. In this case, the space behind the top cupboard must be at least 50 mm deep.

50mm

This appliance complies with the E.E.C. Di- rectives.

Removing the transport support

Your appliance is equipped with transport support to secure the door during transpor- tation.

To remove them do these steps:

1.Open the door.

2.Remove the transport support from the door sides.

3.Remove the transport support from the lower hinge (some models).

Important! Some models are fitted with a silencing pad under the cabinet. Do not remove this pad.

3

2

Levelling

When placing the appliance ensure that it stands level. If necessary adjust the feet us- ing the adjustment spanner supplied.

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power sup- ply socket is not earthed, connect the appli- ance to a separate earth in compliance with current regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above safety precautions are not ob- served.

On some models the wheels in the back- side can be adjusted by turning the nut on the threaded rod to the left to raise the ap-