Drill the unit using a Ø 2.5 mm drill (10 mm max. penetration);
Fix the square fitting to the appliance.
Fit the appliance in the niche by making sure that it stands against the interior surface of the unit on the side where the door hinges of the appliances are fitted. Insert the appliance until the upper strip butts up against the unit (1) and make sure that the lower hinge is in line with the surface of the unit (2).
Fasten the appliance with 4 screws provided in the kit included with the appliance.
(I = short) (P = long)
Apply the sealing strip pushing it between the refrigerator and the adjacent cabinet.
Ø 2,5
13mm
D740 |
2 |
D022 |
I |
P |
D724
16
