Electrolux EW36IC60I B Induction Cooktops, Electrolux Major Appliances, N.A, Optional Accessories

Models: EW36IC60I S

1 4
Download 4 pages 43.53 Kb
Page 2
Image 2
Induction Cooktops

Induction Cooktops

EW36IC60I S, EW36IC60I B

 

30" min.

 

for

36"

unprotected

 

cabinet

24" min.

for

protected

18" surface min.

13"

max. 36" Induction Cooktop Specifications

cabinet

depth

36 3/4"

21 3/4"

 

21/2"

 

2" min. recommended

 

 

distance between rear

Plywood base

edge of cutout and

(optional)

nearest combustible

surface above countertop

 

 

19 5/8"

 

34 5/8"

 

 

 

 

 

 

 

 

 

 

 

4" x 8" opening to

 

 

 

route armored cable

 

 

81/2" min.

if base is present

 

 

 

 

7 1/2" min. to nearest combustible wall (either side of unit)

20 3/8" min. 25" min. 20 1/2" max.

24"

2 1/2" min. from

edge of cutout to front edge of countertop

36" min.

36 1/4" max.

36" Induction Cooktop Specifications

Product Weight – 60 Lbs.

Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz, fused on both sides of line with ground.

Connected Load (kW Rating) @ 240/208 Volts =11.1/9.9kW

Amps @ 240/208 Volts = 46.0/48.0 Amps

Recommended Circuit Breaker – 50 Amps

Always consult local and national electric codes.

Allow 2" space beneath cooktop or optional platform to clear electrical cable and allow space for installation of junction box on wall at back of cooktop. Position center of junction box 10" inward from right side of cooktop cutout, and 12" down from underside of countertop.

Overhead cabinetry should not exceed a 13" maximum depth.

Allow 30" minimum clearance between top of cooktop and bottom of unprotected wood or metal overhead cabinetry.

Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than 36".

Allow 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8" flame-retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.

Allow 2" minimum clearance between rear edge of cutout and nearest combustible surface above countertop.

Allow 7-1/2" minimum clearance from edge of cooktop to nearest combustible wall on either side of unit.

Installation of drawers beneath cooktop requires minimum 10" clearance beneath countertop surface and assured clearance for electrical connection.

To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets.

Induction Cooktop model EW36IC60I is approved to be used over any Electrolux Electric Single Wall Oven. (Refer to Electric Cooktop Installation Over 30" / 27" Electric Single Wall Oven Specifications page on web.)

Induction Cooktop model EW36IC60I is approved to be used in combination with any Electrolux 36" Downdraft Vent. (Refer to model- specific Downdraft Vent product page on web for detailed countertop preparation specifications.)

Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.com for detailed instructions.

Optional Accessories

Granite Countertop Installation Kit – (PN# 903061-9010).

Electrolux Major Appliances, N.A.

USA 10200 David Taylor Drive Charlotte, NC 28262 1-877-4electrolux (1-877-435-3287) electroluxappliances.com

High standards of quality at Electrolux Home Products, Inc. mean

we are constantly working to improve our products. We reserve the right

CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4 1-800-265-8352 electroluxappliances.ca

to change specifications or discontinue models without notice.

EW36IC60I 07/11

© 2011 Electrolux Home Products, Inc.

Printed in the U.S.A.

Page 2
Image 2
Electrolux EW36IC60I B, EW36IC60I S Induction Cooktops, Electrolux Major Appliances, N.A, Induction Cooktop Specifications