■ | Unsatisfactory washing results: | ■ | Too little detergent or unsuitable detergent | |
|
|
| has been used. | |
|
| ■ Stubborn stains have not been treated prior | ||
|
|
| to washing. |
|
|
| ■ The correct temperature and programme was | ||
|
|
| not selected. | |
|
| ■ | Excessive laundry load. | |
|
|
|
| |
■ | The door will not open: | ■ | The programme is still running. | |
|
| ■ The door lock has not been released. | ||
|
| ■ There is water in the drum (a programme with | ||
|
|
| the option | has been selected). |
|
|
| ||
■ Spinning starts late or the | ■ | The electronic unbalance detection device | ||
| machine does not spin: |
| has cut in because the laundry is not evenly | |
|
|
| distributed | in the drum. The laundry is |
|
|
| redistributed by reverse rotation of the drum. | |
|
|
| This may happen several times before the | |
|
|
| unbalance disappears and normal spinning | |
|
|
| can resume. If, after 10 minutes, the laundry | |
|
|
| is still not evenly distributed in the drum, the | |
|
|
| machine will not spin. In this case, | |
|
|
| redistribute the load manually and reselect | |
|
|
| the spin programme. | |
|
|
| ||
■ The machine makes an unusual | ■ | The machine is fitted with a commutator | ||
| noise: |
| motor which makes an unusual noise | |
|
|
| compared with other traditional machines. | |
|
|
| This motor enables a softer start to the spin | |
|
|
| and controls the increase in spin speed | |
|
|
| better. In this way, machine performance is | |
|
|
| improved. |
|
|
|
| ||
■ Water is not visible in the | ■ | The machine, which is the result of modern | ||
| machine: |
| technology, runs in a very economical way | |
|
|
| with low water consumption. Performance is | |
|
|
| nevertheless excellent. | |
|
|
| ||
■ The machine does not dry or the | ■ | The drying time has not been selected. | ||
| laundry is not dry enough: | ■ | The tap is closed. | |
|
| ■ The drain filter is blocked. | ||
|
| ■ A suitable drying time in the correct sector | ||
|
|
| has not been selected. | |
|
| ■ The drum is overloaded. | ||
|
| ■ | The button | has been depressed. |
|
|
|
|
|
ENGLISH
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
| Mod |
| Prod. No |
P0042 | Ser. No |
|
21
