Operating sequence

Before the first wash we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time, shaking them out as much as possible.

Close the door.

P0004

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the

main wash compartment .

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked .

4. Select the desired option(s)

Depress one or more buttons depending on the selected programme.

Spin

Quick

Rinse

Suppress.

Half

Hold

5. Select the temperature

Turn the dial to the required setting.

95

M0045

6.Select the programme and start the machine

Turn the programme selector dial clockwise to the required programme and press the On-Off button : the mains on light comes on and the machine starts to operate.

ENGLISH

3. Measure out the additive

If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.

B

On-Off

C0070

C0071

M0046

P0080S

11

Page 11
Image 11
Electrolux EW 560 F manual Place the laundry in the drum, Measure out the detergent, Select the desired options