12electrolux use
To empty out the water:
●turn the programme selector dial to «O»
●select the Drain or Spin programme
●reduce the spin speed if needed, by means of the relevant button
●depress «Start/Pause» button
●at the end of the programme, the display shows a 0.00 flashing.
The (Door locked) icon desappears and the door can be opened.
Night Cycle : by selecting this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry.
As all spinning phases are suppressed, this washing cycle is very noiseless and it can be selectionned at night or in times with a more economical power rate.
In some programmes the rinses will be performed with more water.
When the programme has finished, the display shows a 0.00 flashing, the (Door locked) icon is still visualized, the «Start/Pause» light is off and the door is locked to indicate that the water must be emptied out.
To empty out the water, please read the previous option steps.
Select the Easy Iron option
Selecting this button the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier.
Furthermore the machine will perform some additional rinses for cotton and synthetics.
Temp. | Spin | Easy Iron Extra rinse | Delay |
This function can be used for cotton and synthetic fabrics.
Select the Extra Rinse option
Temp. | Spin | Easy Iron Extra rinse | Delay |
The machine performs some additional rinses.
This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.
Select the Delay start
Before you start the programme, if you wish to delay the start, press the «Delay» button repeatedly, to select the desired delay.
The corresponding icon will appear on the display in the upper part of the display.
The selected delay time value (up to 20 hours) will appear on the display for about 3 seconds, then the duration of the programme will appear again.
Temp. | Spin | Easy Iron Extra rinse | Delay |