10electrolux
3. Press button 8 : |
– the machine starts its hourly count- |
Fabric |
| Soil Level |
down. |
– The programme will start after the se- |
lected delay has expired. |
Cancelling the delayed start after having pressed button 8 :
1. | Set the washing machine to PAUSE by |
2. | pressing button 8 . |
Press button 6 once until the symbol ’ |
95°/90°C
60°C/50°C
40°C
30°C
Cold
Synthetics
X X
X X
X X
XX X X
X |
| X |
| X |
| X |
X |
| X |
| X |
| X |
X |
| X |
| X |
| X |
X |
| X |
| X |
| X |
X |
| X |
| X |
| X |
|
|
|
|
|
|
|
is displayed |
3. Press button 8 again to start the pro- |
gramme. |
Important! The selected delay can be changed only after selecting the washing programme again.
The Delay Start can not be selected with DRAIN programme.
Select the Time Manager option by pressing buttons 9
By pressing these buttons repeatedly, the duration of the washing cycle can be in- creased or decreased. The icon 7.10 will appear on the display to indicate the chosen degree of soil. This option is available only with Cotton , Synthetic and Delicate pro- grammes.
60°C/50°C |
|
|
| X | X |
| X |
|
|
| X |
40°C |
|
|
| X | X |
| X |
|
|
| X |
30°C |
|
|
| X | X |
| X |
|
|
| X |
Cold |
|
|
| X | X |
| X |
|
|
| X |
Delicates |
|
|
|
|
|
|
|
|
|
|
|
40°C |
|
|
| X | X |
| X |
|
|
| X |
30°C |
|
|
| X | X |
| X |
|
|
| X |
Cold |
|
|
| X | X |
| X |
|
|
| X |
|
|
|
|
|
|
|
|
|
|
|
|
Start the programme by pressing button 8
To start the selected programme, press the button 8 , the green pilot light of the button 8 stops blinking.
To interrupt a programme which is running, press the button 8 : the green pilot light starts blinking.
Soil Level
Intensive
Normal
Daily
Light
Quick
Super Quick 1)
Icon | Type of fabric |
For heavy soiled items
For normal soiled items
For daily soiled items
For slightly soiled items
For very slightly soiled items
For items used or worn for a short time
To restart the programme from the point at which it was interrupted, press the button 8 again . If you have chosen a delayed start, the machine will begin the countdown. If an incorrect option is selected, the red pilot light of the button 8 blinks for 3 times the message Err is displayed for a few seconds.
Altering an option or a running programme
It is possible to change some options before the programme carries them out .
Before you make any change, you must PAUSE the appliance by pressing the button 8 (if you wish to change the Time Manager
1)We recommend you to reduce the load sizes (see Washing programmes table).
Important! The Time Manager cannot be selected with the Economy programmes. The availability of these soil level icons change according to the type of fabric as shown in the following chart.
Fabric | Soil Level |
Cottons
option, you must cancel the running pro- gramme and make your selection again). Changing a running programme is possible only by resetting it. Turn the programme se- lector dial to 
and then to the new pro- gramme position. Start the new programme by pressing the button 8 again. The washing water in the tub will be not emptied out.
