10
Downdraught Extractor
1. To turn the downdraught extractor
on, press k.
2. To select the height position, press
m.
The downdraught extractor will
move to middle position and switch
on at extraction rate 1.
To turn the downdraught extractor
off, hold ldown until bottom
position has been reached.
Pressing kwill turn extraction off,
but the downdraught extractor will
remain where it is and not descend
into the worktop.
Height positions
Installation beside electrical appli-
ances
The downdraught extractor is
variable between the middle and top
position.
Raising
The downdraught extractor is
switched on.
Select the height position within 10
seconds.
1. Press
m.
The downdraught extractor will
move to middle position. The
dampers are deployed.
2. Press
magain.