PRE-INSTALLATION REQUIREMENTS

Tools Required for Installation:

1.1/4 in. nut driver

2.3/8 in. socket with ratchet.

3.3/8 in. open end wrench.

4.7/16 in. socket with ratchet.

5.9/16 in. open end wrench.

6.Channel-lock adjustable pliers.

7.Carpenter’s level.

ELECTRICAL REQUIREMENTS

CIRCUIT - Individual, properly polarized and grounded 15 amp. branch circuit fused with 15 amp. time delay fuse or circuit breaker.

POWER SUPPLY - 2 wire, with ground, 120 volt, single phase, 60 Hz, Alternating Current. NOTE: The use of this washer with power created by gas powered generators, solar powered generators, wind powered generators or and other generator other than the local utility company is not recommended.

OUTLET RECEPTACLE - Properly grounded 3-prong receptacle to be located so the power supply cord is accessible when the washer is in an installed position. NOTE: GFI (Ground Fault Interrupter) receptacle is not required.

GROUNDING REQUIREMENTS

Improper connection of the equipment grounding conductor can result in a risk of electrical shock. Check with a licensed electrician if you are in doubt as to whether the appliance is properly grounded.

1.The washer MUST be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electrical shock by a path of least resistance for electrical current.

2.Since your washer is equipped with a power supply cord having an equipment-grounding conductor and a grounding plug, the plug MUST be plugged into an appropriate, copper wired receptacle that is properly installed and grounded in accordance with all local codes and ordinances or in the absence of local codes, with the National Electrical Codes, ANSI/NFPA 70 (latest edition). If in doubt, call a licensed electrician.

DO NOT cut off or alter the grounding prong on the power supply cord. In situations where a two-slot receptacle is present, it is the owner’s responsibility to have a licensed electrician replace it with a properly grounded three prong grounding type receptacle.

WATER SUPPLY REQUIREMENTS

Hot and cold water faucets MUST be installed within 42 inches (107 cm) of your washer’s water inlet. The faucets MUST be 3/4 inch (1.9 cm) garden hose type so inlet hoses can be connected. Water pressure MUST be between 10 and 120 pounds per square inch (maximum unbalance pressure, hot vs. cold, 10 psi.) Your water department can advise you of your water pressure. The hot water temperature should be about 140 degrees F (60 degrees C).

DRAIN REQUIREMENTS

Models equipped with drain pump:

1.Drain MUST be capable of eliminating 17 gals (64.3 L) per minute.

2.A standpipe diameter of 1-1/4 in. (3.18 cm) minimum.

3.The standpipe height above the floor should be:

Max.

NOTE:

Drain hose attached to the washer can reach a 58 in. (147 cm) high standpipe. For higher standpipe use hose P/N 131461201, available from an authorized parts distributor. If drain is less than 24 in. (61 cm), install a siphon break kit, available at your local hardware store.

Models equipped with gravity drain:

1.Floor drain MUST be capable of eliminating 17 gals (64.3 L) per minute.

2.Floor drain diameter must be at least 1/2 inch larger than drain hose.

3

Page 2 Page 4
Page 3
Image 3
Electrolux Full Size Tumble Action Washer PRE-INSTALLATION Requirements, Electrical Requirements, Grounding Requirements
Page 2 Page 4

Full Size Tumble Action Washer specifications

The Electrolux Full Size Tumble Action Washer is a remarkable appliance that redefines laundry convenience, efficiency, and performance. Designed with modern consumers in mind, this washer integrates advanced technologies to create a seamless laundry experience. One of the most notable features of this model is its innovative tumble action design, which ensures thorough cleaning while being gentle on clothes. The drum's unique motion helps to lift and separate clothes, allowing detergent to penetrate fabrics more effectively, resulting in cleaner laundry.

This washer comes with a variety of wash cycles and options to cater to different fabric types and soil levels. From heavy-duty cycles for tough stains to delicate settings for fragile items, users can easily customize their laundry experience. Additionally, the machine features a time-saving quick wash option that can deliver clean clothes in a fraction of the time, perfect for those busy days when time is of the essence.

Efficiency is at the heart of the Electrolux Full Size Tumble Action Washer. It is designed to be energy and water-efficient, boasting an impressive Energy Star certification. By using innovative technologies, this washer minimizes water usage while still maintaining optimal cleaning performance. Furthermore, the adaptive load sensing feature adjusts water levels according to the load size, ensuring that every wash is cost-effective and eco-friendly.

Another standout characteristic is the advanced vibration reduction technology, which significantly diminishes noise and vibration during operation. This feature makes it an excellent choice for homes where laundry is done frequently and at all hours. The washer’s sleek, modern design also makes it an attractive addition to any laundry room.

For added convenience, the Electrolux washer includes a user-friendly control panel with intuitive settings and options. The large capacity drum allows for bigger loads, reducing the number of washes needed and saving users valuable time. In addition, the self-cleaning dispenser ensures that detergent residues do not accumulate, maintaining peak performance.

In conclusion, the Electrolux Full Size Tumble Action Washer combines advanced technologies with user-friendly features to provide a superior laundry experience. Its capacity, efficiency, and innovative design make it a top choice for individuals and families looking to simplify their laundry routines.
Top Page Image Contents