Fig. 1

Description of the Appliance

The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam.

The hood is supplied as an extractor unit and can also be used with a recirculation mode by fitting a charcoal filter.

You will need an original charcoal filter for this function (Available from your local Service Force Centre).

Only for HI 8820: The cooker hood is supplied ready for use as a recirculation hood and may be used for extraction by removing the charcoal filter which has

been fitted inside the cooker hood.

A

 

Extraction mode

 

In this mode fumes are extracted to the outside via a hose connected to the coupling ring A. Fig. 1.

In order to obtain the best performance the hose should have a diameter equal

to the outlet hole.

• Should there already be a pipe of diameter 125 or 120 mm that ducts to

the outside through the walls, it is possible to use the 150/125-120 mm reduction flange provided. In this case the hood will be slightly noisier.

Recirculation mode

The air is filtered through a charcoal filter and returned to the kitchen.

You will need an original charcoal filter for the recirculation mode. (See Special Accessories).

Fix the deflector using 4 screws Ø 3.5x6.5 mm. Fig. 2.

F

Fig. 2

65

Page 6
Image 6
Electrolux HI 8820, DI 8820, DI 8821 Description of the Appliance, Extraction mode, Recirculation mode