38 electrolux
Apply covers (C-D) on joint cover
lugs and into hinge holes.
Snap vent grille (B) and hinge
covers (E) into position.
Separate parts Ha, Hb, Hc, Hd as
shown in the figure
B
E
E
D
C
PR266
Ha
Hb
Hc
Hd
From the plastic cover (E), which is
used to cover the hinge with the pivot
pin, you must take away the part as
indicated in the drawing.
This operation is made easer since
there is, in the internal part of the cover
hinge lid a groove that facilates the
removal of this coomponent.
“Remove the part marked with DX,
if the pivot pin is inserted in the right
hinge, SX in opposite case.”