38electrolux
From the plastic cover (E), which is used to cover the hinge with the pivot pin, you must take away the part as indicated in the drawing.
This operation is made easer since there is, in the internal part of the cover hinge lid a groove that facilates the removal of this coomponent.
“Remove the part marked with DX, if the pivot pin is inserted in the right hinge, SX in opposite case.”
Apply covers
Snap vent grille (B) and hinge covers (E) into position.
D | C |
| |
| E |
E | B |
Separate parts Ha, Hb, Hc, Hd as shown in the figure
HbHa
Hc
Hd
PR266