Electrolux K 78800-4 i

Installation

9. Open the appliance door and the furni-

ture door at 90°. Insert the small square

(B) into guide (A). Put together the

appliance door and the furniture door

and mark the holes as indicated in the

figure.

Remove the squares and drill holes with

Ø 2 mm at 8 mm from the outer edge

of the door. Place the small square on

the guide again and fix it with the

screws supplied.

8mm

10. Should the lining up of the furniture

door be necessary, use the clearance of

slots.

At the end of operations, it is necessary

to check if the door of the furniture clos-

es properly.

11. Fix cover (D) on guide (B) until it clips into

place.

PR167/1

Contents

Main Dear customer, Contents Important Safety Instructions Page Disposal Appliance Packaging Information Disposal of old Appliances Remove transport packaging Installation Installation Location Building-in Your refrigerator needs air Page Page Page Power supply Electrical Connection Page Prior to Initial StartUp Starting up and temperature regulation Page Correct storage Defrosting The fridge defrosts automatically Variable Inner Door Cleaning and Care Energy Saving Tips What to do if ... Correcting Malfunctions 19 What to do if ... Symptom Possible Cause Remedy Changing the light bulb Noises during Operation Regulations, Standards, Guidelines Technical terminology