What to do if...
Symptom |
| Possible Cause |
| Remedy |
|
|
|
|
|
Heavy build up of frost, possibly also on the door seal.
Door seal is not air tight (possibly after reversing the door).
Carefully warm the leaking sections of the door seal with a hair dryer (on a cool setting). At the same time shape the warmed door seal by hand such that it sits correctly.
The compressor does not |
|
|
|
|
start immediately after |
| This is normal, no error has |
| The compressor starts after |
changing the temperature |
| occurred. |
| a period of time. |
setting. |
|
|
|
|
|
|
|
|
|
|
|
|
| Switch off COOLMATIC or |
|
|
|
| FROSTMATIC manually, or |
|
| COOLMATIC or FROSTMAT- |
| wait to set the tempera- |
Temperature cannot be set |
|
| ture until the function has | |
|
| IC functions switched on. |
| reset automatically (refer |
|
|
|
| |
|
|
|
| also to COOLMATIC/FROST- |
|
|
|
| MATIC section). |
|
|
|
|
|
|
|
|
|
|
Water on the floor or on |
| Water drain hole is |
| See the “Cleaning and |
storage shelves. |
| blocked. |
| Care” section. |
|
|
|
|
|
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or disconnect from the mains supply.
Light bulb data:
☞1. To switch off, press the ON/OFF button until the mains power light extinguishes.
2.Unplug the mains plug.
3. To change the light bulb, undo the screw.
4.Press the light bulb cover as shown and slide it towards the rear of the appli- ance.
5.Change the faulty light bulb.
6.Refit the light bulb cover and the screw.
7.Put the refrigerator back into operation.
23
