Setting and Starting a Programme

ENGLISH 15

5.Measure out the detergent and the fabric conditioner.

6.Carefully close the detergent dis- penser. Make sure that the flap does not cause a blockage when you close the drawer.

4.To use liquid detergent, turn the flap down.

With the flap in the position

–Do not use gelatinous or thick liquid detergents.

–Do not put more liquid deter- gent than the limit showed in the flap.

–Do not set the prewash phase.

–Do not set the delay start function.

1.Turn the programme knob. The re- lated programme indicator comes on.

2.The indicator of button 4 flashes with red colour.

3.The display shows the default tem- perature and spin speed. To change the temperature and/or the spin speed, press the related buttons.

4.Set the available functions. The indi- cator of the set function comes on or the display shows the related symbol.

5.Press button 4 to start the pro-

gramme. The indicator of button 4 is on.

INTERRUPT A PROGRAMME

1.Press button 4 . The indicator flashes.

1.Press button 1 to cancel the pro- gramme and to deactivate the ap- pliance.

2.Press button 1 again to activate the appliance. Now, you can set a new washing programme.

The appliance does not drain the water.

You can change only some functions before they operate.

1.Press button 4 . The indicator flashes.

2.Change the function set.

2.Press button 4 again. The washing programme continues.

1.Press button 5 again and again until the display shows the number of minutes or hours. The related symbols comes on.