Child safety device | Electrolux LAVAMAT 50810 instruction

If RINSE HOLD has been selected:

Following a rinse hold DOOR and END will illuminate in the programme progress display.

First the water must be drained:

–Either turn the programme selector to OFF, then to DRAIN and press the START/PAUSE button (the water will be drained without spin- ning),

–or turn the programme selector to OFF and then to SPIN. Depending on the type of washing, if required, reduce the spin speed and press the START/PAUSE button (the water will be drained and the washing spun).

Child safety device

If the child safety device has been activated, the door can no longer be shut.

Activating the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di- rection as far as it will go.

1 Warning! The knob must not be de- pressed after being set, otherwise the child safety device is not acti- vated. The knob must stand proud as shown in the illustration.

Deactivating the child safety device:

Turn the knob in an anti-clockwise direction as far as it will go.

16

Image 16

Electrolux LAVAMAT 50810 manual Child safety device, If Rinse Hold has been selected, Deactivating the child safety device

Contents

Lavamat Following symbols are used in the text Dear Customer Contents Installation and connection instructions Safety information concerning installation Safety Prior to using the appliance for the first timeChild safety Follow the Installation and connection instructions General safety Resulting overheating may constitute a fire hazard Description of the appliance Control panel Programme overview Drain Spin Application/Features Care Symbols1 Before the first wash Preparing and sorting washingPreparing washing Sorting washing Running a wash cycle Opening the door/loading washingAdding detergent/conditioner Open the door pull the handle on the door If you are using liquid detergent Switching on the appliance/selecting a programmeWashing powder/tablets for the main wash cycle Programme Option Buttons Changing the spin speed/selecting rinse holdShortened wash programme for lightly soiled washing Setting the delay timer Activating/deactivating RINSE+Activating RINSE+ Deactivating RINSE+ Starting a programme Interrupting a programme/adding washingWashing cycle complete/Removing the washing Interrupting a programme Deactivating the child safety device Child safety deviceIf Rinse Hold has been selected Cleaning and care Detergent drawerWashing drum Door and rubber collar Remedying small faults yourself What to do if Only a few large items If the wash result is not satisfactory There are grey stains on the washingFoam can still be seen following the final rinse There are white residues on the washing When the water has all drained away Carrying out an emergency drain Drain pump Packaging material DisposalOld appliance Technical data Consumption values Safety information concerning installation This washing machine cannot be built-in Installing the appliance When using a sack trolley to transport the washing machineTransporting the appliance Removing the transit packaging Where to install Making the appliance level If the appliance is to stand on a base Brown Live Wire coloured green and yellow Electrical Connection Permanent Connection Connecting the appliance to the water supplyPermitted water pressure Water inlet 35m long pressure hose is supplied with the appliance Water Drainage From your Service Force CentreFor drainage into an outlet Pumping heights of over 1 metre Warranty conditions Great Britain 0870 5 929 Customer CareFor general enquiries concerning Major Appliances AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG