![](/images/new-backgrounds/1062522/6252225x1.webp)
1.Fill the ice cube maker until the cubes will be full in the horizontal position or by the load line mark in the vertical position. After this close the ice cube maker with cap.
2.Place it in the freezer and leave to solidify holder in the lid of the.
3.To loosen the frozen cubes, either bend the ice cube tray or hold it under running water for a few seconds.
Important! Never try to free an ice tray that is frozen to the freezer compartment using pointed or sharp edged objects. Use a soft plastic scraper.
Replacement of electric bulbs
Warning! Risk of electric shock! Prior to replacement of electric bulbs, remove the plug from the mains socket or discon- nect or unscrew the fuse or lodgement.
←
Lamp
For the removal of the lampshade you have to push the hook by a screwdriver first, and than you can turn it out
Lamp specification: 220 to 240 V, max
15W bulb holder: E14
electrolux cold 13
1.Turn the temperature control knob counterclockwise to"off" position.
2.Remove mains plug
3.For replacement of the bulb press the cover hook and remove as shown in the illustration
4.Replace defective light bulb. 5.Place the cover again.
Packaging and positioning
Food must be cold before freezing (no more than room temperature) Food must be packed in airtight and moisture
Place fresh food for freezing close to the cold sides of the freezer, making sure that it is not in contact with frozen food already in the freezer.
Never fill the freezer to more than loading line (arrow with dashed line) shown on
the illustration.
See under "Helpful hints".
Capacity
The freezing capacity of the freezer is stated in the data plate (kg/24 hours). Do not exceed the amount stated - if you do, the freezing capacity time will be extended. The data plate is located on the back of the cabinet.