Electrolux CONTROLS, ON:, OFF:, START:, NOTICE, Fuel Valve, Engine Switch, Recoil Starter, Switch position:, Do not allow the starter to snap

CONTROLS

Engine Switch

To start and stop the engine.

Switch position:

OFF: To Stop the engine. Key can be removed/inserted.

ON:To run the engine after starting.

START: To start the engine by turning the starter motor.

Return the key to the ON position once the engine has started. Do not use the starter for more than 5 seconds at a time. If the engine fails to start, release the switch and wait 10 seconds before operating the starter again.

Recoil Starter

To start the engine. Pull the starter grip lightly until resistance is felt. then pull briskly.

NOTICE

Do not allow the starter to snap

Back against the engine. Return it gently to prevent damage to the starter.

Fuel Valve

The fuel valve is located between the fuel tank and carburetor. When the valve lever is in the ON position, fuel is allowed to flow from the fuel tank to the carburetor. Be sure to return the lever to OFF after stopping the engine.

7