2
. The evaporator is frosted up.
3
. The temperature control setting is incorrect.
4
. The gas pressure is incorrect - check the pressure regu-
lator at the gas container.
5
. The ambient temperature is too high.
6
. To much food is loaded at one time.
7
. The door is not properly closed or the magnetic sealing
strip is defective.
8
. More than one source of energy is used at the same
time. If the refrigerator still does not work properly, call a
service technician.

M

AINTENANCE

C
oncerning gas- and electric installations, only authorized
e
xperts are allowed to carry out maintenance and repair
w
orks. Besides, it is recommendable to contact an authori-
z
ed service if it comes to repair works.
A
ccording to the valid regulations G607 of DVGW, the gas
i
nstallation as well as the connect flue oulets are to be
c
hecked every two years by an expert (this has to be
a
rranged by the person responsible).

S

OME USEFUL HINTS

M
ake sure that:
●The refrigerator is not operating on 12 V when the ve-
hicle is parked, otherwise you will drain the car bat-tery in
a short time.
●Defrosting is carried out periodically.
●The refrigerator is left with the door(s) ajar when it is not
to be used for some time.
●Liquids or items with a strong odour are well packa-ged.
●The ventilation openings are unobstructed.
●The door is secured by means of the travel catch when
the caravan is on the move.
●Only one mode of operation at a time is used to run the
refrigerator.

G

UARANTEE AND SERVICE

T
he refrigerator is guaranteed for one full year on condition
t
hat it is used in a correct manner and in accordance with
t
hese operating and installation instructions.
I
t is also embraced by a European guarantee as described
i
n the brochure supplied with the refrigerator.
S
ervice and spare sparts are obtainable from your dealer or
E
lectrolux - consult the telephone directory
T

ECHNICAL DATA RM 4212/ 13

Overall dimensions, refrigerator
Height ........................618 mm
Width ........................486 mm
Depth (incl. cooling unit)
without door.............435 mm
with door................474 mm
B
uild-in dimensions
Height ........................620 mm
Width ........................490 mm
Depth ........................450 mm
C
apacity
gross ......................... 60 lit.
net ......................... 51 lit.
frozen food compt .................6 lit.
W
eight (without packaging) .............21 kg
E
lectrical data
Input 230 V ..................... 105watt
12V.....................100watt
Energy consumption /24 h.........2,3kWh
L
P gas data
Input ........................ 186watt
ditto, low flame ....................86watt
Energy consumption /24 h........0,24 kg
C
ooling medium Ammonia (R 717)
I
NSTALLATION INSTRUCTIONS
R

EPOSITIONING THE HINGES

T
he door hinges can be moved to the opposite side in the
f
ollowing way:
●Unscrew the upper hinge pin, taking care not to lose the
set of washers and bushes.
●Lift the door from the lower hinge pin.
●Unscrew the pin and mount it on the opposite side hinge.
●Unscrew the travel catch and mount it on the opposite
side.
●On the upper edge of the door are two plastic inserts for
the alternative holes of the travel catch. Pry out carefully
and exchange
●Fit the door on the pin and reassemble the pin with
washers and bushes in its new place.
●Check that the door closes properly and seals all round.
D

OOR PANEL

T
he door panel can easily be mounted or changed. The
d
imensions of the panel must be:
Height..........................532 +/- 1mm
Width .......................... 453 +/- 1mm
Thickness ....................max 3,8 mm
●Remove the door, see REPOSITIONING THE HINGES.
●Remove the lower trim moulding and then withdraw the
panel by sliding it downwards.
●Fit new panel in place and slide it up as far as possible.
●Fit the trim moulding back in place.
The sealed cooling system must not be opened, since
it is under high pressure.
10