ENGLISH
11
- Check for obstruction on the waste outlet pipe and
the overflow aperture.
TANK WATER LEVEL TOO HIGH
- Check for obstruction on the waste outlet pipe and
the overflow aperture.
CALL THE AUTHORIZED SERVICE CENTER
CALL THE AUTHORIZED SERVICE CENTER
- The appliance continues to operate, but appropriate
checks by an authorized technician are recommen-
ded.
C4 DETERGENT/RINSE-AID DISPENSERS AND
SETTINGS
If the appliance is connected to a water softener or
osmotic device, contact the detergent supplier for the
specific product.
Peristaltic dispensers (rinse-aid and detergent) require
periodic maintenance. The internal hose of the rinse-aid
dispenser should undergo periodic maintenance (at
least once or twice a year).
1. Dishwasher with incorporated detergent dispen-
ser pump (Figure 11).
Pump “R” dispenses about 0.021 oz per second /0.6 g
per second of detergent. When the appliance is filled
with water for the first time in the day, it dispenses
1.058oz/30g of detergent in 50 sec., thereby providing a
concentration of 0.046 oz per quart/1.3 g per liter. Pump
“R” dispenses 0.126 oz/3.6 g in 6 sec. at each cycle.
Dispenser operating time may be changed, following the
instructions given in the next paragraph.
Insert the hose provided in the kit into the detergent con-
tainer.
2. Dishwashers with incorporated peristaltic rinse-
aid dispenser pump (Figure 11).
Pump “S” dispenses about 0.0046 oz per second/0.13 g
per second of rinse-aid. It dispenses 0.014 oz/0.39 g in 3
sec. at each rinse.
Dispenser operating time may be changed, following the
instructions given in the next paragraph.
Insert the hose provided in the kit into the rinse-aid con-
tainer .
Connections for automatic detergent dispenser
(Figure 11)
Figure 11
There is a ready-made impression “N” (inside
dishwasher chamber floor) to be perforated
(5/16”dia/8mm) for positioning the detergent concentra-
tion measuring sensor.
Inside the tank there is a hole “P” (3/8”dia/10mm) closed
with a plug, which may be used for mounting a liquid
detergent injector.
The sensor and liquid detergent injector should be instal-
led without compromising the watertightness of the
appliance.
Electrical connections for automatic detergent and
rinse-aid dispensers.
Terminals are available on the power supply terminal
box for the electrical connection of external dispensers
working at 208V or 240V. Max. power 30 VA.
Figure 12
Connect the detergent dispenser between terminals 7
and 9. These connection points are live for a set time
during filling of the tank and at the start of the wash cycle
(see paragraph “Setting the dispensers”).
B2
C1..C8
E1..E8
S
R
N
P
L1
L2
L3