Initial Start-Up

01. Insert plug into mains socket.

2.Press ON/OFF button.

3.Set the refrigerator to the desired temperature (see section: "Tempera- ture Adjustment").

Temperature Adjustment

With the buttons for temperature adjustment the desired temperatures in the refrigerator can be adjusted.

01. Press either the „+“ (WARMER) or „-“ (COLDER) button.

The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

2.To adjust to a warmer temperature, press the „+“ (WARMER) button. To adjust to a colder temperature, press the „-“ (COLDER) button. The changed setting is immediately displayed on the temperature display.

Each time the button is pressed the temperature is adjusted by 1 °C. Adjustable temperature range: +2 °C to +8 °C, +15 °C (Holiday mode)

Note: From a food safety point of view, +5 °C for the refrigerator compartment should be considered cold enough as a storage temperature.

3 When the buttons are not further pressed after an adjustment has been made, after a short period (approx. 5 sec.) the temperature display swit- ches over and again displays the ACTUAL temperature in the refrigera- tor. The display changes from flashing to continuous illumination.

The compressor will start and then run automatically.

Information! When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place.

3 Goods to be refrigerated can be loaded immediately after switching on, because the storage temperature in the refrigerator is quickly reached.

818 19 88-01/8

19

Page 19
Image 19
Electrolux SANTO 3675-6 KA Initial Start-Up, Temperature Adjustment, Compressor will start and then run automatically