Prior to Initial Start-Up

1 Before connecting the appliance to the mains and putting it into ope-

ration for the first time, leave the appliance to stand for 2 hours. This is necessary to allow the oil to flow back into the compressor. Otherwise the compressor may be damaged.

01. Please clean the appliance interior and all accessories prior to initial start-up (see section: "Maintenance and Cleaning").

2.Remove the cold accumulation block from the freezer tray.

3.Place the cold accumulation block into a compartment or drawer only after the optimal storage temperature of -18 °C has been reached, and allow to freeze.

4.After 24 hours place the cold accumulation block in the freezer tray or in the front of the upper drawer.

5.Re-freeze the thawed cold accumulation block in the same fashion, e.g. after cleaning the appliance.

818 18 12-01/0

21

Page 21
Image 21
Electrolux SANTO 4085-8 KG manual Prior to Initial Start-Up