Prior to Initial Start-Up
1 Before connecting the appliance to the mains and putting it into ope- ration for the first time, leave the appliance to stand for 30 minutes if it was transported upright. After transport on its side, the appliance must be left to stand for 2 hours before putting it into operation. This is necessary to allow the oil to flow back into the compressor. Otherwise the compressor may be damaged.
01. Please clean the appliance interior and all accessories prior to initial
Starting Up and Regulating the Temperature
Fridge and freezer sections can each be regulated independently of the other. The control panel is situated behind the fridge door at the top of the fridge section.
01. Insert plug into mains socket. Within 20 seconds the electronics carry out a system test and switch the appliance on. The ON/OFF button lights up in green, the interior lighting comes on and the appliance starts working. If the temperature warning signal sounds, this can be switched off by pressing the ALARM OFF button.
3 Starting up when the appliance is switched off:
Press and hold down the ON/OFF button for three seconds. The ON/OFF button lights up in green, the interior lighting comes on and the appliance starts working. If the temperature warning signal sounds, it can be switched off by pressing the ALARM OFF button.
16
