Electrolux SG 414 Pressure Testing, Checking the Grill, Checking the Hotplate

Models: SG 414

1 48
Download 48 pages 62.37 Kb
Page 42
Image 42

If the wiring is extended or a completely new cable fitted a 3-pin 13 amp plug should be fitted. (See Fig.4a). Connect the wires as follows:

BROWN to the Live Terminal. BLUE to the Neutral Terminal.

GREEN and YELLOW to the Earth Terminal.

As the colours of the wires in the mains lead which you fit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter 'E' or by

the earth symbol or coloured GREEN or GREEN and

YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 'N' or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L' or coloured RED.

FIT A 3 AMP FUSE TO THE PLUG HOLDER.

Ensure that the supply cable cannot get caught by the stability bracket.

Fig.4a

Plug in the appliance.

6. PRESSURE TESTING

1 The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.GasThe pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid, with the handle attached, into the grill compartment. Light the grill burner by turning the grill tap to its full on position and pushing the ignition button. As soon as the burner is lit the button can be released.

8. CHECKING THE HOTPLATE

Lift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pushing the

ignition button. As soon as the burners are lit the button can be released.

9. CHECKING LID SHUT-OFF DEVICE

1.Lift the lid.

2.Turn one hotplate burner tap to its full on position and push the ignition button.

3.Close lid. There should now be no gas supply to the hotplate and the burner will go out.

4.Turn off the hotplate tap and lift the lid. The gas supply should now be restored to the hotplate. When the tap is turned on.

42

Page 42
Image 42
Electrolux SG 414 Pressure Testing, Checking the Grill, Checking the Hotplate, Checking LID SHUT-OFF Device

SG 414 specifications

The Electrolux SG 414 is a standout model in the realm of modern vacuum cleaners, designed to cater to the diverse cleaning needs of households while ensuring efficiency and ease of use. This powerful appliance combines innovative technologies and thoughtful features to deliver exceptional performance on various floor types.

One of the key characteristics of the Electrolux SG 414 is its robust suction power. Equipped with a high-efficiency motor, this vacuum cleaner effortlessly captures dust, dirt, and allergens, making it an ideal choice for individuals with allergies or respiratory issues. The advanced filtration system includes a HEPA filter that traps even the tiniest particles, ensuring cleaner air in your living space.

In terms of versatility, the Electrolux SG 414 rises to the occasion. It is designed to tackle multiple surfaces, whether it’s carpets, hardwood floors, or tile. The adjustable power settings allow users to customize the suction power according to the type of surface being cleaned, providing a thorough clean without damaging delicate materials. The vacuum also features a range of accessories, including crevice tools and upholstery attachments, enabling effective clean-up in hard-to-reach areas and on various household fabrics.

Another notable feature of the SG 414 is its lightweight and compact design. Weighing only a few kilograms, it is easy to maneuver, making it suitable for extended cleaning sessions without causing fatigue. The vacuum cleaner also boasts a user-friendly interface, with simple controls that allow for quick adjustments on the fly.

Additionally, the Electrolux SG 414 operates with low noise levels, ensuring a peaceful cleaning experience without disturbing other household members. Its corded design provides uninterrupted power, eliminating concerns about battery life.

In summary, the Electrolux SG 414 stands out for its powerful suction, effective filtration system, adaptable features, and ease of use. It is an excellent option for anyone seeking a reliable and efficient vacuum cleaner capable of handling a variety of cleaning tasks. With its combination of performance and practicality, the SG 414 is designed to meet the demands of modern living, making it a valuable addition to any home.