
Technical data 13
3.Remove the lamp cover (refer to the il- lustration).
4. Replace the used lamp with a new lamp of the same power and specifically de- signed for household appliances. (the maximum power is shown on the lamp cover).
5.Install the lamp cover.
6.Tighten the screw to the lamp cover.
7.Connect the mains plug to the mains socket.
8.Open the door. Make sure that the lamp comes on.
Closing the door
1.Clean the door gaskets.
2.If necessary, adjust the door. Refer to "Installation".
3.If necessary, replace the defective door gaskets. Contact the Service Center.
TECHNICAL DATA
Dimension of the recess Height
Width
Depth
Rising Time
1225 mm
560mm
550mm
12h
The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
INSTALLATION
Positioning
WARNING!
If you are discarding an old appliance that has a lock or catch on the door, you must ensure that it is made unusable to prevent young children being trapped inside.
The appliance shall have the plug accessible after installation.
Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance: