Electrolux manual Easy To Install, Easy To Clean, Easy To Use, UK Hood Type WT65E

Electrolux Dishwashing

UK Hood Type WT65E

The Electrolux Dishwashing range is produced for customers with the highest expectations of performance, energy efficiency and ergonomic operation for their dishwashing operation. The product range comprises glasswashers, undercounter dishwashers, hood type dishwashers, rack type dishwashers, flight type dishwashers and pot and pan washers.

The hood type WT65E dishwasher has a capacity of 65 baskets per hour and is suitable for cold or hot water connection.

EASY TO INSTALL

•Integral Class 'A' airbreak for direct connection to a mains water supply.

•Rinse booster pump included.

•Drain pump to discharge to pipework above ground level.

•Detergent and rinse aid peristaltic pumps.

•External electrical connecting

board, protected by a waterproof plastic box.

•Simple service from the front and from the side panels.

•Pre-arrangement for connection to an energy management device or HACCP system.

•Corner or straight flow installation.

•Extensive Electrolux Handling System range of tabling and roller conveyors to create a functional and ergonomic dishwash lay-out.

EASY TO CLEAN

•Smooth surfaces and wash tank with rounded corners.

•Easily removable washing & rinsing arms, filters and rack support.

•Rack support guide pressed in the tank body.

•No pipes inside the washing chamber.

•Self cleaning cycle. Electronic control of the functions incorporating fault diagnosis system, number of cycles counter and number of drain cycles counter.

•Simple control panel with digital thermometers indicating both wash and rinse temperatures.

•Four dishwashing programs: one for glass and lightly soiled items, one for normally soiled items, one for heavily soiled items and the fourth program is continuous.

•Height adjustable rounded feet.

•IPX5 water protection.

EASY TO USE

•Fully automatic in operation with a gauranteed wash and rinse performance that is independent of external influences such as low incoming water temperature or pressure.

•Atmospheric boiler combined with the rinse booster pump for perfect rinsing performances in terms of sanitation, energy saving (water temperature always constant during rinsing cycles), independence from the water pressure on the network.

•Easy to opearte hood thanks to a low friction guide system.

•Double skin hood ceiling and completely closed and insulated back for less heat and noise dispersion.

•Pre-arrangement for connection to an Energy Management device.