Electrolux WT82AR208, 534175 Electric, Exhaust Requirements, Key Information, Water, Warewashing

Electric

Supply voltage:	534174 (WT82AL208)	208 V/3ph/60Hz
	534175 (WT82AR208)	208 V/3ph/60Hz
	534176 (WT82AL240)	240 V/3ph/60Hz
	534177 (WT82AR240)	240 V/3ph/60Hz

Dishwasher requires two separate electrical service connections. Connection 1 for RINSE MODULE; Connection 2 for WASH MODULE. Refer to below table for Amp requirements.

Connection 1:	208 V/3ph/60Hz	71A
	240 V/3ph/60Hz	62A
Connection 2:	208 V/3ph/60Hz	69A
	240V/3ph/60Hz	62A
Total Amp Load:	208 V/3ph/60Hz	133.8A (44.1kW)
	240 V/3ph/60Hz	118.9A (44.1kW)

Exhaust Requirements

Unit supplied as standard with extended vent hoods (can be removed during installation if not required).

Exhaust extraction not more than 100 CFM

Refer to installation diagram for minimum exhaust hood installation height .

Key Information

Productivity racks per hour	250 racks / 4500 dishes
(max speed):	(average 18 dishes per rack)
Productivity racks per hour	150 racks / 2700 dishes
(min speed):	(average 18 dishes per rack)
Table to Table connection:	82-5/8″ (2098 mm)
Number of Tanks:	2
Height with door open:	83-7/16″ (2119 mm)
Charging hole size (width):	20-7/8″ (530 mm)
Charging hole size (height):	19-3/4″ (501 mm)
Shipping weight:	1268 lb (575 kg)
Shipping width:	93-5/16″ (2370 mm)
Shipping depth:	40-15/16″ (1040 mm)
Shipping height:	81-1/8″ (2060 mm)
Shipping volume:	157 cu.ft (4.46 m³)
Noise level:	<70 dBA

Unit predisposed to accept external detergent dispensers, detergent probes and rinse aid dispensers.

Warewashing

82″ Multi Tank Conveyor Dishwasher with Energy Saving Device (ESD) WT82

Water

Inlet Water supply pressure:	22 – 102 psi (150 – 700 kPa)
Inlet Cold Water Supply Temperature	39 – 59 °F (4 - 15 °C)
for rinse section:
Inlet Hot Water Supply Temperature	140 °F (60 °C)
for wash section:
Inlet Water supply hardness:	4-8 gpg (7-14 °fH) max
Incoming Hot Water line size	G 3/4″
(wash section):
Incoming Cold Water line size (rinse):	G 3/4″
Drain line size (wash section):	G 1-1/2″
Drain line size (rinse section):	G 1-1/2″
Hot Water consumption: Gallons/hr:	4 gal/hr (15 liters)
Cold Water consumption: Gallons/hr:	83 gal/hr (315 liters)
Water consumption/rack:	0.3 gal/rack (0.75 l/rack)
Wash Temperature:	160 – 172 °F (71-78 °C)
Wash tank size:	40 gal (150 liters)
Wash pump power (top wash arms):	3 hp (2.2 kW)
Wash pump power (lower wash arms):	1.5 hp (1.2 kW)
Power Rinse Temperature:	160 – 172 °F (71-78 °C)
Power rinse tank size:	6 gal (23 liters)
Rinse pump power:	0.4 hp (0.32 kW)
Final Rinse Temperature:	180 – 194 °F (82-90 °C)
Final Rinse water flow:	79 gal/hr (300 l/hr)
Hot water booster capacity:	3.17 gal (12 liters)
Initial fill Hot Water requirements:	40 gal (150 liters)

Warewashing
82″ Multi Tank Conveyor Dishwasher with Energy Saving Device (ESD) WT82	10-29-08