2
B. Preparing the tripod screen for projection:
Follow the steps below and Fig. 3.
1. Pull the screen handle up vertically and hook the screen handle on the Top Hook.
*Note: Use the Keystone Eliminator to prevent “Keystone Effect” from occurring. Keystone Effect is
caused when a projector presents its image at a downward angle causing a trapezoid-shaped image to
appear on the screen. The Keystone Eliminator is designed to eliminate that effect by sloping the screen
forward.
2. Twist the Vertical Locking Sleeve Ring counter-clockwise to unlock the current position of the
Vertical Extension Bar and raise it as necessary to the desired height.
3. Pull the Screen Height Adjustment Lock/Release tab out (to the left) located just above the
Carrying Handle to raise or lower the bottom of the. Once the desired height has been set, push the tab
in to lock the position in place.
1
2
3
Fig. 3
3
2
4
Fig. 2
Fig.1
1