Elo TouchSystems 1524L manual AccuTouch Touchscreen Specifications, Mechanical, Optical

AccuTouch Touchscreen Specifications

Mechanical

Construction

Positional Accuracy

Touchpoint Density

Touch Activation Force

Surface Durability

Expected Life

Performance

Top: Polyester with outside hard-surface coating with clear or antiglare finish.

Inside: Transparent conductive coating.

Bottom: Glass substrate with uniform resistive coating. Top and bottom layers separated by patented separator dots.

Standard deviation of error is less than 0.080 in. (2.03 mm). This equates to less than ±1%.

More than 100,000 touchpoints/in² (15,500 touchpoints/cm²).

Typically less than 4 ounces (113 grams).

Meets Taber Abrasion Test (ASTM D1044), CS-10F wheel, 500 g. Meets pencil hardness 3H.

AccuTouch technology has been operationally tested to greater than 35 million touches in one location without failure, using a stylus similar to a finger.

Optical

Light Transmission	Typically 85% at 550-nm wavelength (visible light spectrum).
(per ASTM D1003)
Visual Resolution	All measurements made using USAF 1951 Resolution Chart, under
	30 X magnification, with test unit located approximately 1.5 in.
	(38 mm) from surface of resolution chart.
	Antiglare surface: 6:1 minimum.
Haze (per ASTM D1003)	Antiglare surface: Less than 15%.
Gloss (per ASTM D2457)	Antiglare surface: 90 ± 20 gloss units tested on a hard-coated front
	surface.

C-29