Touch Interface Connection
NOTE: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off.
1 | 2 | 3 | 3 |
1Connect one end of the power cord to the monitor and the other end to the outlet.
2Connect one end of the video cable to the rear side of computer and the other to the LCD monitor. Tighten by turning the two thumb screws clockwise to ensure proper grounding.
3Connect one end of either the touchscreen serial(RS232) cable or the touch screen USB cable(but not both) to the rear side of the computer and the other end to the LCD monitor. Tighten by turning the two thumb screws clockwise to
ensure proper grounding(optional module USB cable does not have thumb screws)
4Press the power button on front panel to turn the monitor power on.
