Chapter 6 - Safety & Maintenance
Safety
To avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor. They
are not user-serviceable.
The slots located on the sides and top of the touchmonitor case are for ventilation. Do not block or insert
anything inside the ventilation slots.
Ensure that your installation is equipped to maintain the specified environmental conditions listed in the
Technical Specifications chapter.
Care and Handling
The following tips will help keep your touchmonitor functioning at an optimal level:
Disconnect the AC power cable before cleaning.
To clean the display unit cabinet, use a clean cloth lightly dampened with a mild detergent.
It is important that your unit remains dry. Do not get liquids on or inside the unit. If liquid does get
inside, have a qualified service technician check it before you power it on again.
Do not wipe the screen with a cloth or sponge that could scratch the surface.
To clean the Touchscreen, use window or glass cleaner applied to a clean cloth or sponge. Never
apply the cleaner directly to the touchscreen. Do not use alcohol (methyl, ethyl or isopropyl),
thinner, benzene, or other abrasive cleaners.

Waste Electrical & Electronic Equipment Directive (WEEE)

This product should not be disposed of with household waste. It should be deposited at a

facility that enables recovery and recycling. Please refer to:

http://www.te.com/aboutus/environmentalInitiatives/recycling/default.asp

User Manual – 1541L
SW601635 Rev A_Template - Page 22 of 27