2-15
STEP 4-Connecting the Power Cable
Depending on where you live, you will use either the European or US/Canadi a n power cable.
• Connect the female end of the power cable to the Brick power supply.
• Connect the Brick power cable into the power port on the touchmonitor.
• Route the cable through the cable management channel.
NOTE: To protect your equipment against risk of damage from electrical surges in the power line,
plug the touchmonitor’s power cord into a surge protector, and then connect the surge protector
to a grounded AC electrical outlet.
POWER CABLE
POWER
CONNECTIONS ON UNDERSIDE