2-16 Elo Entuitive Touchmonitor User Guide
Optimizing LCD Display
To ensure the LCD display works well with your computer, configure the display mode of your graphic
card to make it less than or equal to 1280 x 1024 resolution, and make sure the timing of the display
mode is compatible with the LCD display. Refer to Appendix A f or more information a bout resolution.
Compatible video modes for your touchmonitor are listed in Appendix C.
VESA Mounting Interface
Your touchmonitor conforms to the VESA Flat Pa nel Monitor Physical Mounting Interface (FPMPMITM)
Standard which defines a physical mounting interface for flat panel monitors, a nd corresponding stan-
dards for flat panel monitor mounting devices, such as wall and ta ble arms. The VESA mounting interface
is located on the back of your touchmonitor and is shipped pre-connected to the base.
To use the VESA mount, unscrew the rear U bracket, then mount to either 75mm or 100mm VESA
mount. Use M4x7 machine screws. Do not penitrate the screw into the monitor more than 10mm.