STEP 5-Connecting the Power Cable
CONNECTIONS ON UNDERSIDE
POWER
POWER CABLE | BRICK POWER SUPPLY |
|
Depending on where you live, you will use either the European or US/Canadian power cable.
•Connect the female end of the power cable to the Brick power supply.
•Connect the Brick power cable into the power port on the touchmonitor.
•Route the cable through the cable management channel.
NOTE: To protect your equipment against risk of damage from electrical surges in the power line, plug the touchmonitor’s power cord into a surge protector, and then connect the surge protector to a grounded AC electrical outlet.
