Chapter 7 – Regulatory Information

I. Electrical Safety Information:

Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.

There are no operator serviceable parts inside this equipment. There are hazardous voltages generated by this equipment which constitute a safety hazard. Service should be provided only by a qualified service technician.

Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment to mains power.

II. Emissions and Immunity Information

Notice to Users in the United States: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Notice to Users in Canada: This equipment complies with the Class A limits for radio noise emissions from digital apparatus as established by the Radio Interference Regulations of Industrial Canada.

Notice to Users in the European Union: Use only the provided power cords and interconnecting cabling provided with the equipment. Substitution of provided cords and cabling may compromise electrical safety or CE Mark Certification for emissions or immunity as required by the following standards:

This Information Technology Equipment (ITE) is required to have a CE Mark on the Manufacturer’s label which means that the equipment has been tested to the following Directives and Standards: This equipment has been tested to the requirements for the CE Mark as required by EMC Directive 89/336/EEC as indicated in European Standard EN 55022 Class A and the Low Voltage Directive 73/23/EEC as indicated in European Standard EN 60950.

General Information to all Users: This equipment generates, uses and can radiate radio

frequency energy. If not installed and used according to this manual the equipment may cause interference with radio and television communications. There is, however, no guarantee that interference will not occur in any particular installation due to site-specific factors.

1)In order to meet emission and immunity requirements, the user must observe the following: a) Use only the provided I/O cables to connect this digital device with any computer.

b) To ensure compliance, use only the provided manufacturer’s approved line cord.

c) The user is cautioned that changes or modifications to the equipment not expressly approved

by the party responsible for compliance could void the user’s authority to operate the equipment.

2)If this equipment appears to cause interference with radio or television reception, or any other device:

a) Verify as an emission source by turning the equipment off and on.

If you determine that this equipment is causing the interference, try to correct the interference by using one or more of the following measures:

i) Move the digital device away from the affected receiver.

ii) Reposition (turn) the digital device with respect to the affected receiver.

User Manual

– 2243L, 2244L

SW601560 Rev C

- Page 16 of 20

Page 15 Page 17
Page 16
Image 16
Elo TouchSystems 2243L user manual Regulatory Information
Page 15 Page 17

2243L specifications

The Elo TouchSystems 2243L is a state-of-the-art touch monitor designed for a variety of interactive applications, offering an engaging experience for both commercial and consumer users. Its 22-inch display is characterized by a sleek and modern design, making it a perfect fit for retail environments, kiosks, or any setting where customer interaction is encouraged.

One of the standout features of the 2243L is its advanced touch technology. It employs Elo’s proprietary IntelliTouch technology, which provides an accurate and responsive touch experience. This ensures that users can effortlessly navigate through applications, enhancing usability and efficiency. Additionally, the monitor supports multiple touch points, allowing for intuitive gestures such as pinch-to-zoom and multi-finger scrolling, which are increasingly important in today’s application design.

In terms of display quality, the 2243L excels with its high-definition resolution of 1920 x 1080 pixels. This leads to vibrant and crisp visuals, making it ideal for displaying detailed images and videos. The monitor also features wide viewing angles, thanks to its IPS panel technology, ensuring that content remains visible from various perspectives without color distortion.

The Elo TouchSystems 2243L is equipped with a range of connectivity options, including HDMI, VGA, and USB, allowing for easy integration with a variety of devices such as PCs, POS systems, and digital signage solutions. The intuitive plug-and-play setup ensures that users can get started quickly without the need for complex installation procedures.

Durability is another critical characteristic of the 2243L. The monitor boasts a durable glass surface, which is scratch-resistant and designed to withstand heavy touch usage. This makes it particularly suitable for busy environments where reliability is crucial. Moreover, with an IP54 rating, the 2243L is resistant to dust and moisture, ensuring longevity even in challenging conditions.

Furthermore, the monitor’s adjustable stand allows for tilting and height adjustments, providing ergonomic flexibility for users. This makes the 2243L not only a powerful tool for interaction but also a comfortable one for extended use.

Overall, the Elo TouchSystems 2243L stands as a versatile and dependable interactive touch monitor that combines advanced technology, high-quality display, robust durability, and ergonomic design, making it an ideal choice for a wide range of applications in diverse environments.
Top Page Image Contents