1. Introduction

This document provides information on how to check the current firmware versions and on how to update the firmware on the main board and docking station of the Elo Tablet (hereafter referred to as the tablet). The main board and docking station firmware can both be updated via the procedure and utility specified in Chapter 3. This utility allows a user to select the new firmware file that the tablet main board and/or docking station are to be updated to.

Note: Take care to ensure that the correct firmware file is chosen. The firmware files may be obtained by contacting Elo Technical Support.

The current latest firmware versions are as follows:

Tablet main board firmware

Filename: ELO-EC-V1.32.bin

The MainBoard EC Version will be listed in InfoAbout (discussed in Chapter 2) as 1.32.

Docking station firmware

Filename: ELO-EC-DS-V1.26.zed

The Docking EC Version will be listed in InfoAbout (discussed in Chapter 2) as 1.26.

Note: Please ensure that the tablet / docking station is connected to a power supply via the AC/DC power adapter kit during a firmware update. This is to ensure that power is not interrupted while the update is taking place. If power is lost while the update is in progress, the device will be rendered unusable. Once the update starts, leave the device undisturbed until the update is complete.

If you still have questions after reading this document, please contact an Elo Touch technical representative or customer service.

Visit http://www.elotouch.com/Support/TechnicalSupport/default.asp for technical support.

Refer to the last page of this user manual for Elo contact information worldwide.

Elo® Tablet Firmware Update Application Note

ES601079 Rev A, Page 5 of 10

Page 5
Image 5
Elo TouchSystems ES601079 manual Introduction, Tablet main board firmware