Connecting Your Touchmonitor
Elo Entuitive Touchmonitor CRT Desktop User Guide - 9
4. Power on your monitor using the Soft power switch and check
that the power LED is on, then power on your PC. If not, repeat
steps 2, 3, and 4, or refer to Chapter 4, Troubleshooting.
5. After a brief pause the picture should appear. If necessary, adjust
the front panel controls according to your personal preference
(see Chapter 3).
6. Insert the Elo TouchTools CD-ROM in your computer’s CD-
ROM drive to install the appropriate touchscreen driver soft-
ware. Follow the directions starting on the next page to install
the driver software.
Power LED Soft Power Switch