Elo TouchSystems ET1567L-XXWC-X, ET1549L-XXWC-X, ET1548L-XXWC-X manual Connecting the Power Cable

Connecting the Power Cable

Connections on underside

Power Cable

Power cable

Depending on where you live, you will use either the European or US/Canadian power cable.

•Connect the female end of the power cable into the power port on the touchmonitor.

NOTE: To protect your equipment against risk of damage from electrical surges in the power line, plug the touchmonitor’s power cord into a surge protector, and then connect the surge protector to a grounded (three-pronged) AC electrical outlet.

•Power on your PC then your touchmonitor. After a brief pause the picture should appear.

2-14E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e