POWER SOURCE

The unit operates with mains power supply. Clock and alarm with DC back-up, battery: 1 x 9V (not included).

AC POWER SUPPLY

Ensure that the AC power cord is in accordance with your local voltage cord and connect to mains power supply. Press the POWER button to turn on the unit.

BACK-UP BATTERY

Insert a 9V battery (not included) into the battery compartment located at the bottom; preferably use a long-life battery. In case of power failure when listening to the radio it will switch off and the display will show a wrong radio frequency, because the CPU cannot receive any signals from the radio. After the power failure the radio frequency will be restored to the last frequency and continue working.

RADIO FUNCTION

1.Set the FUNCTION SELECTOR (MODE) to ON.

2.Select desired band with the BAND SELECTOR.

3.Rotate the TUNING control to find your desired radio station.

4.Adjust the VOLUME to a comfortable level.

5.For better reception extend the FM wire antenna to its full length when listening to FM or adjust the direction when receiving AM.

6.To switch off the radio set the FUNCTION SELECTOR (MODE) to OFF.

TIME SETTTING

Press and hold the TIME SET button and simultaneously press SLOW SET or FAST SET to skip to the correct time.

Notes:

Press SLOW SET button each time to skip one minute, press and hold the button to skip continuously. Press and hold FAST SET button to skip fast and continuously.

ALARM SETTING

Note: You can set two different alarm times on this unit.

1.Press and hold either the AL 1 or AL 2 button, then press the SLOW SET/FAST SET button to skip to the desired alarm time.

2.Set the FUNCTION SELECTOR (MODE) to AUTO.

3.Set the ALARM switch to AL 1 or AL 2 (for one alarm) or AL 1+2 (for two alarms), the corresponding indicator will illuminate.

At the preset alarm time the alarm will set on the radio automatically. To pause the alarm and sleep another 9 minutes press the SNOOZE button.

4.To stop the alarm, slide the FUNCTION SELECTOR (MODE) to OFF or press AL OFF.

SLEEP FUNCTION

To switch off the radio automatically after 59 minutes slide the FUNCTION SELECTOR (MODE) to AUTO and press SLEEP. After 59 minutes the radio will switch off automatically.

At the preset alarm time you will be woken by radio.

SPECIFICATIONS

 

Power supply

230V~ 50Hz

 

(check the rated power on rating plate at the bottom of the device)

 

Back-up 9V DC

Power consumption

3W

Operating temperature

+5ºC - +35ºC

Receiving Bands

AM/FM

Tuning Range

AM: 525 - 1615kHz

 

FM: 87.5 - 108MHz

Speaker impedance

8Ω

NET WEIGHT:

537g

Specifications are subject to change without prior notice.

7.

Page 6 Page 8
Page 7
Image 7
Elta 4248N Power Source, AC Power Supply, BACK-UP Battery, Radio Function, Time Settting, Alarm Setting, Sleep Function
Page 6 Page 8

4248N specifications

The Elta 4248N is a state-of-the-art airborne surveillance radar system designed for various applications, including military reconnaissance, security operations, and air traffic control. This advanced radar unit offers exceptional performance in both land and maritime environments, showcasing Israel's commitment to cutting-edge technology in the defense sector.

One of the standout features of the Elta 4248N is its long-range detection capability. Boasting an impressive detection range of over 250 kilometers, the radar can accurately track multiple targets simultaneously, including aircraft, missiles, and ground vehicles. This high level of situational awareness is paramount during critical missions, allowing operators to make informed decisions in real-time.

The Elta 4248N employs Multiple Modes of Operation, which enhances its versatility. It can operate in various modes, including search, track, and identification. The radar can effectively distinguish between friend and foe, ensuring that allies are not mistakenly targeted in the heat of operations. This classification capability plays a crucial role in modern warfare, where precision and accuracy can mean the difference between success and failure.

Incorporating advanced signal processing technology, the Elta 4248N minimizes the effects of clutter and interference, providing a clear operational picture even in challenging environments. The radar's sophisticated algorithms can filter out unwanted signals, ensuring that only relevant data is presented to the operators. This feature is particularly useful in urban or densely populated areas, where many potential false targets exist.

The Elta 4248N is designed for integration into various platforms, including unmanned aerial vehicles (UAVs), fixed-wing aircraft, and helicopters. This flexibility allows military forces to deploy the radar system in various scenarios, providing a significant tactical advantage. The compact design and lightweight construction make it easy to mount on various platforms without compromising overall performance.

With strong emphasis on user-friendliness, the Elta 4248N features an intuitive operator interface, allowing rapid interpretation of data and quick decision-making. Training programs and simulation environments are available to ensure that personnel can efficiently operate the system, maximizing its potential in the field.

In summary, the Elta 4248N represents a significant leap forward in airborne radar technology. Its long-range capabilities, advanced signal processing, versatile operational modes, and ease of integration make it an indispensable asset for modern military operations. As threats evolve, so does the need for advanced surveillance and tracking systems, and the Elta 4248N is well-equipped to meet these challenges head-on.
Top Page Image Contents