16
OPERATION AND FUNCTIONS FM tuning
The DAB-50 offers both manual and automatic tuning on the FM band.
This makes it possible to save just one specific channel. It also makes it possible to adjust the supplied
antenna for the best possible signal.
DAB/FM
4
3
2
1AUTOTUNE INFO
CONTROL/TUNING
PRESS TO SELECT
1
++
2
2
1To use the autotune function through the front
panel controls, you must press the
AUTOTUNE button. The unit will search for a
frequency with a proper signal.
You can also activate the autotune function
through the remote control.
The display will now use a higher frequency. At the
top of the display you can see that the frequency
increases. When the tuner has found a channel,
the tuning process will automatically stop. The
sound from the channel found will be heard and
any RDS information will be displayed.
If no channels are found, you must check if the
antenna has been correctly connected. You can do
this by tuning in on a channel through manual
tuning on the FM band, and then press the INFO
button to display the signal bar and check the
signal strength (see the section on manual FM
tuning).
DAB/FM
4
3
2
1AUTOTUNE INFO